Link electronic Stereo Amplifier PAA 652 User Manual

200 SERIES

LINK ELECTRONICS, INC.

PRECISION AUDIO DA

MODEL PAA - 652

MADE IN THE USA

FEATURES

‹ Low Noise

‹ Differential Input

‹ Gain Range ±16 dB

‹ Eight Outputs, PFM-220

The PAA-652 mono audio distribution amplifier is

another member of the 600 series products, and is

designed to reflect the latest in the state of the art

in engineering techniques. The PAA-652 is an

extremely versatile audio amplifier, offering

outstanding performance. The inputs and outputs

use captive screw clamp terminals located on the

matching rear cell assembly. The rear cell model

PAA-600 is a separate item and should be

purchased independently.

The PAA-652 is well suited for any type of

operation. The input is balanced bridging, but can

be terminated into 150 or 600 ohms.

unbalancedinputis converted to balancedoutputs.

The transmission path of the PAA-652 is virtually

transparent.

The features include 100dB of Signal-to-Noise

ratio, .05 dB frequency response from 20 Hz to 20

KHz, and .03% total harmonic distortion from 20

Hz to 20 KHz. The isolation between modules is

greater than 100 dB. A gain control on the front

panel allows for gain adjustment of ±16dB. The

PAA-652/1operatesinthePFM-220frameholding

up to four (4) modules.

The PAA-652/1 provides eight high performance

low impedance mono outputs. The input is over

voltage protected for up to 120 volts AC or DC.

LINK

ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668

Phone 573 334 4433 FAX 573 334 9255

‹